Accumulative high-speed injection molding machine


ASIIA Series (80ASIIA~700ASIIA)
 
  Accumulative high-speed injection molding machine  
 

Accumulative high-speed injection molding machine


200A SIIA
 
  1. Specialize in production of thin-wall items and high-speed injection.
  2. Close-loop injection equipped with high feedback proportional and directional valve to assure injection consistence.
  3. Double loops system (injection pressure charge during holding pressure/material charging) available as option to improve cycle time.
200A SIIA  

ITEMS UNIT 80ASIIA 100ASIIA 140ASIIA 160ASIIA 180ASIIA 200ASIIA 250ASIIA
A B C A B C A B C A B C A B C A B C A B C
INJECTION UNIT Screw Diameter mm 24 28 32 32 36 40 36 40 45 40 45 50 40 45 50 45 50 55 50 55 60
Theoretical Shot Volume cm3 65 89 116 130 165 203 192 237 300 260 329 406 283 358 442 386 477 577 530 641 763
Shot Weight of Injection (PS) g 68 93 122 137 173 214 202 249 315 273 346 427 297 376 464 406 501 606 556 673 801
Injection Stroke mm 160 180 210 230 250 270 300
Injection Pressure kg/cm2 2997 2202 1686 2567 2028 1643 2543 2060 1628 2526 1996 1617 2771 2189 1773 2383 1930 1595 2542 2101 1766
Injection Rate cm3/sec 228 310 405 305 385 476 508 627 794 567 717 885 956 1210 1493 1013 1250 1513 949 1149 1367
Injection Speed mm/sec 500 500 500 500 500 500 500
Screw Rotation Speed R.P.M 318 304 278 232 250 201 217
MOLD CLAMPING UNIT Mold Clamping Force ton 80 100 140 160 180 200 250
Mold Opening Stroke mm 215 300 345 390 420 490 540
Space Between Tie Rods(H×V) mm 314×238 360×360 410×410 440×440 460×460 510×510 555×555
Mold Thickness mm 100-320 120-360 130-450 160-480 160-520 180-550 200-580
Ejector Force ton 2.5 3 3.5 4 4 4.5 5
Ejector Stroke mm 60 70 90 115 115 130 145
ELECTRICAL EQUIPMENT Pump Driving Motor hp 10 15 15 20 25 30 25 40 30 40 30 40 40 50
Heater kw 4.7 5.9 6.7 7.6 7.6 11 14
Temperature Zones zones 3 4 4 4 4 5 5
 
ITEMS UNIT 280ASIIA 350ASIIA 400ASIIA 450ASIIA 600ASIIA 700ASIIA
A B C A B C A B C A B C A B C A B C
INJECTION UNIT Screw Diameter mm 55 60 65 60 65 70 65 70 75 70 75 80 75 80 85 80 85 90
Theoretical Shot Volume cm3 641 763 895 865 1015 1177 1104 1281 1470 1454 1669 1899 1788 2035 2297 2306 2603 2919
Shot Weight of Injection (PS) g 673 801 940 908 1066 1236 1160 1345 1544 1527 1753 1994 1878 2136 2412 2421 2733 3064
Injection Stroke mm 300 340 370 420 450 510
Injection Pressure kg/cm2 2270 1907 1625 2049 1746 1505 1950 1682 1465 1916 1669 1467 1991 1752 1552 2087 1850 1650
Injection Rate cm3/sec 1063 1266 1485 1178 1383 1604 1238 1436 1648 1464 1680 1912 1408 1601 1807 1343 1516 1699
Injection Speed mm/sec 450 450 400 400 400 400
Screw Rotation Speed R.P.M 228 238 245 212 208 215
MOLD CLAMPING UNIT Mold Clamping Force ton 280 350 400 450 600 700
Mold Opening Stroke mm 575 620 675 745 845 900
Space Between Tie Rods(H×V) mm 576×576 630×630 680×680 750×750 850×850 920×900
Mold Thickness mm 220-620 220-640 250-700 300-780 320-850 360-920
Ejector Force ton 5.5 6 6.5 7.5 8 9
Ejector Stroke mm 160 160 180 220 220 250
ELECTRICAL EQUIPMENT Pump Driving Motor hp 40 50 50 60 60 75 60 75 75 100 90 100
Heater kw 16 20.5 20.5 22.5 24.3 26
Temperature Zones zones 5 5 6 6 7 7
Shot weight is based on polystyene at gravity of 1.05 with power soure 220V,60Hz.
Specification or color of machine is subject to change without prior notice.

 

Nitu Technical Services

304, Mahavir Industrial Estate, Ramchandra Lane extn., Kanchpada,  Malad (W), Mumbai-400 064.

Mr. Tukaram  - Mob : +919820607145

Email : tukaram@nitutechnicalservices.com | tukaram_mohite@yahoo.co.in | info@nitutechnicalservices.com

Mr Nitin Naik - Mob : +919820296382

Email : nitin@nitutechnicalservices.com | nitinnaik62@yahoo.com